data sheet doc. no : qw0905-LUR2043H rev. : a date : 05 - may. - 2005 ligitek electronics co.,ltd. property of ligitek only super bright round t ype led lamps LUR2043H
0.5 typ 25.0min note : 1.all dimension are in millimeter tolerance is ? 0.25mm unless otherwise noted. 2.specifications are subject to change without notice. directivity radiation 1.0min 2.54typ ligitek electronics co.,ltd. property of ligitek only part no. LUR2043H package dimensions 5.2 4.2 4.0 3.0 1.5max page 1/4 25% 75% 100% 50% -60 x -30 x 75% 25% 0 50% 100% 0 x 30 x x 60
storage temperature tstg -40 ~ +100 j red note : 1.the forward voltage data did not including ? 0.1v testing tolerance. 2. the luminous intensity data did not including ? 15% testing tolerance. typical electrical & optical characteristics (ta=25 j ) emitted material part no LUR2043H algainp/gap soldering temperature spectral halfwidth ??f nm dominant wave length f dnm viewing angle 2 c 1/2 (deg) min. water clear lens 630 20 2700 typ. max. 1.7 2.6 1500 min. 30 max 260 j for 5 sec max (2mm from body) forward voltage @20ma(v) color tsol luminous intensity @20ma(mcd) absolute maximum ratings at ta=25 j part no. LUR2043H forward current peak forward current duty 1/10@10khz power dissipation reverse current @5v operating temperature parameter page 2/4 ur(h) 10 130 100 50 -40 ~ +85 ratings i f t opr ir pd i fp symbol ma j g a mw ma unit ligitek electronics co.,ltd. property of ligitek only electrostatic discharge esd 2000 v
ligitek electronics co.,ltd. property of ligitek only 0.0 0.8 forward voltage@20ma normalize @25 j relative intensity@20ma normalize @25 j wavelength (nm) ambient temperature( j ) fig.5 relative intensity vs. wavelength relative intensity@20ma 1.0 0.0 550 0.5 -40 -20 600 650 700 -40 80 20 04060100 ambient temperature( j ) -20 0 40 20 100 80 60 1 forward current(ma) relative intensity normalize @20ma fig.3 forward voltage vs. temperature 0.9 1.0 1.1 1.2 0 1 1.0 1.0 0.5 1.5 2.0 2.5 3.0 1 fig.4 relative intensity vs. temperature forward voltage(v) 3.0 2.0 4.0 5.0 forward current(ma) 100 10 1000 fig.1 forward current vs. forward voltage typical electro-optical characteristics curve 10 100 1000 ur(h) chip fig.2 relative intensity vs. forward current part no. LUR2043H page3/4 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0
thermal shock test solder resistance test solderability test high temperature high humidity test mil-std-202: 107d mil-std-750: 1051 mil-std-883: 1011 mil-std-202: 210a mil-std-750: 2031 jis c 7021: a-1 mil-std-202: 208d mil-std-750: 2026 mil-std-883: 2003 jis c 7021: a-2 mil-std-202:103b jis c 7021: b-11 this test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. this test intended to see soldering well performed or not. the purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. the purpose of this test is the resistance of the device under tropical for hous. 1.t.sol=230 j? 5 j 2.dwell time=5 ? 1sec 1.ta=105 j? 5 j &-40 j? 5 j (10min) (10min) 2.total 10 cycles 1.t.sol=260 j? 5 j 2.dwell time= 10 ? 1sec. 1.ta=65 j? 5 j 2.rh=90 %~95% 3.t=240hrs ? 2hrs part no. LUR2043H low temperature storage test test item operating life test high temperature storage test reliability test: jis c 7021: b-12 mil-std-883:1008 jis c 7021: b-10 mil-std-750: 1026 mil-std-883: 1005 jis c 7021: b-1 reference standard ligitek electronics co.,ltd. property of ligitek only the purpose of this is the resistance of the device which is laid under condition of low temperature for hours. the purpose of this is the resistance of the device which is laid under ondition of high temperature for hours. 1.under room temperature 2.if=20ma 3.t=1000 hrs (-24hrs, + 72hrs) 1.ta=105 j? 5 j 2.t=1000 hrs (-24hrs, + 72hrs) 1.ta=-40 j? 5 j 2.t=1000 hrs (-24hrs, + 72hrs) test condition this test is conducted for the purpose of detemining the resisance of a part in electrical and themal stressed. description page 4/4
i t e m n o . q ' t y : p c s n , w , : k g s g , w , : k g s 3. 12 inner boxes / carton size : l x w x h 58.5cm x 34cm x 34cm l c/no: made in china w h h 2. 8 bag / inner box size : l x w x h 33.5cm x 19cm x 7.5cm l w 1. 1000pcs / bag packing specification ligitek electronics co.,ltd. property of ligitek only
|
